CX Low Noise Medium Pressure Blower Application
The CX low-noise medium-pressure blower is made of aluminum alloy, which greatly reduces the weight and achieves the purpose of light weight. 3. The motor is a fully closed outer blower type aluminum frame motor with a special shaft design, which can be used for a long time.
Features：
1. Large air volume, low noise and light weight. 2. The aluminum alloy material is used to greatly reduce the weight and achieve the purpose of light weight. 3. The motor is a fully enclosed blower-type aluminum frame motor with a special shaft design, which can be used for a long time. 4. Special blade design, large air volume, low noise and long life. 5. Special air volume adjustment damper, high air volume control stability, easy operation. 6. Complete styles and types, large inventory!
Installation Precautions:
1. Flat washers and spring washers must be used to tighten the screws;
2. Can use rubber buffer glue to bear the weight of high-pressure blowers, especially high-power vacuum adsorption blowers, safe;
3. For some occasions that require noise, a muffler can be installed to reduce the noise (generally, about 5dB), and the muffler is installed at the end of the air inlet or outlet pipe;
4. For some occasions with high noise requirements, according to the conditions of the machine itself, a layer of sound-absorbing cotton can be added to meet the noise requirements of the site. For details, please consult our company's service personnel.
5. Pay attention to the distance between the high-pressure blower and the box when using the sound-absorbing cotton, pay attention to the ventilation and heat dissipation of the blower, and pay attention to the use of rubber buffer rubber to bear the weight of the high-pressure blower. For details, please consult our company staff;
6. The inlet and outlet pipes of the medium-pressure blower should be connected with hoses to isolate vibration.