Blower Maintenance Case
Many customers do not have maintenance experience after purchasing blower, leading to various types of failures shortly after purchase, resulting in various questions about fan suppliers. We summed up the following cases for everyone to analyze and learn from.
Case 1: Maintenance work that should be carried out in a dusty working environment
The working environment with more dust refers to the working environment with more fine dust in the air absorbed by the blower. Due to the high precision of the blower itself, the gap between the impeller and the wind drum of the main working parts of the fan is very small, and it is easy to jam the blower after frequent inhalation of dust accumulation, resulting in damage to the fan. Generally when working in such a working environment. A filter device must be installed at the air inlet. Second, the filter device of the fan must be cleaned regularly, the higher the dust density, the shorter the cleaning interval.
Case 2: maintenance work in the work environment where the pressure and feed state are not smooth.
The working environment where the pressure is not smooth refers to the working environment where the wind pressure of the fan itself is large and the actual needs, so that the excess air volume of the blower itself has no place to discharge. Usually in such a working environment, the fan body must be equipped with a pressure relief valve to regulate the fan, but at the same time, it is also necessary to pay attention to whether the pipe through which the wind sent out by the blower is matched with the air outlet of the fan itself, and whether the pressure delivery pipe of the fan is clean. Therefore, in such cases, it is necessary to pay attention to the size of the fan's air outlet pipe and whether there are obstacles.
Case 3: Maintenance in high temperature working environment.
In such case, the blower is damaged quickly in the working environment, you can consult the supplier before purchasing the temperature that the fan itself can withstand, and purchase the fan according to the facts. Because the body of the fan is made of metal, the life of the fan working in a high temperature environment will be relatively shortened. Therefore, in such cases, it is necessary to regularly maintain the moving parts of the fan, and the cycle of adding lubricating oil needs to be shortened.