Weighing Scale Load Cell Indicator

Brand SOP

Product origin China

Delivery time 2days

Supply capacity 300 pcs/day

6 Digits Scale LED Display Weight Digital Weighing Electric Weight Indicator
Optional 2/3/4-way relay or OC output, relay contact AC 250V/1A, OC output drive 100mA/48V
Output 4-20mA, 0-20mA, 0-5V, 0-10V, 12bit
accuracy, drive load ≤ 500 ohms. 485 communication port can execute ModbusRTU protocol or active upload protocol (transmission communication can only choose one)
Ambient temperature: -20 ~ 50 ° C; relative humidity: ≤ 85% RH; avoid strong corrosive gases.
AC 100 ~ 240V, 50 ~ 60HZ; power consumption ≤ 5W
Panel/cabinet, high quality plastic case
Small size: outer dimensions 96×48 deep 84mm, opening size: 92*45mm
Big size: outer dimensions 160*80*125mm, opening size: 152*72mm

Send Email

Weighing Scale Load Cell Indicator

Product Features

6 Digits Scale LED Display Weight Digital Weighing Electric Weight Indicator

Optional 2/3/4-way relay or OC output, relay contact AC 250V/1A, OC output drive 100mA/48V

Output 4-20mA, 0-20mA, 0-5V, 0-10V, 12bit
accuracy, drive load ≤ 500 ohms. 485 communication port can execute ModbusRTU protocol or active upload protocol (transmission communication can only choose one)

Ambient temperature: -20 ~ 50 ° C; relative humidity: ≤ 85% RH; avoid strong corrosive gases.
AC 100 ~ 240V, 50 ~ 60HZ; power consumption ≤ 5W

Panel/cabinet, high quality plastic case

Small size: outer dimensions 96×48 deep 84mm, opening size: 92*45mm

Big size: outer dimensions 160*80*125mm, opening size: 152*72mm

Specification

Power Supply	AC100~240V, 50~60HZ, Power consumption≤5W
Display	LED display. display range: -9999~29500
Accuracy	0.05%
Input Signal	0-2.5mV/V
Acquisition Rate	80 times/sec
Switch Output	2/4-way relay or OC output, relay contact AC 250V/1A, OC output drive 100mA/48V
Transmission output	4-20mA, 0-20mA, 0-5V, 0-10V, RS485, RS232
Bridge voltage	5V/100mA
Power supply	AC100~240V, 50~60HZ
Dimensions	1527250mm
Use environment	Temp：-20~50℃ Relative humidity: ≤85%RH Avoid strong corrosive gas

Parameter Modification Key: In the standby state, long press this key for 3 seconds to enter the parameter modification interface.Calibration Key: In the standby state, long press this key for 3 seconds to enter the parameter calibration interface.Add Key: It is used to increase the value in the parameter state setting. Used to switch to view basic information in standby or measurement state.Shift Key/ Clear Key: In the parameter setting state, shift to select the value that needs to be modified. At this time, the selected data bit will flash. In the standby state or the measurement state, it is manual Zero.

Usually we will calibrate the indicator before shipment.

Packing & Delivery