Reasons and results of wire rope breakage in rope displacement sensor
Reasons and results of wire rope breakage in rope displacement sensor
The steel wire rope of the on-site rope position sensor broke. In response to this situation, the displacement sensor manufacturer has compiled the causes and consequences of the broken steel wire rope of the rope displacement sensor. They hope that in the selection process, customers can avoid detours and reduce cost losses.
The main reasons for wire rope breakage in rope displacement sensors are as follows:
1. Insufficient range.
Due to insufficient range, the steel wire rope was forcefully pulled apart. And due to excessive tension, the steel wire rope bounced back, causing damage to components such as the potentiometer and spring.
2. Damage to the work environment.
Any product is damaged during use. If the steel wire rope is operated in harsh environments, abnormal use such as wear, compression, bending, etc., it is also more likely to cause the steel wire rope to break. Of course, the quality of the steel wire rope also determines this. MIRAN's rope displacement sensors are made of high-quality imported steel wire ropes, which are durable and not easily broken.
3. The installation angle is incorrect.
During the operation of the rope displacement sensor, if the angle deviation of the steel wire rope is too large, over time, it will greatly reduce the service life of the broken steel wire rope. So, customers need to focus on this issue during installation.
4. The adapter configured is incorrect.
If the equipment needs to rotate for operation without a universal adapter, it is easy to break the steel wire rope.
The wire rope of the rope displacement sensor is broken. If the tension is not high, it is still okay. The repair only needs to replace the wire rope. But if the tension is high, it may cause damage to other components, and the potentiometer needs to be replaced, which increases the cost significantly. In short, when selecting a product, customers should provide as much detailed information as possible about their needs. When you are unsure about the selection, you can ask the displacement sensor supplier to assist in selecting.